Genie SX-150, Operator'S Manual

Page: 54 / 77

Operator's Manual Second Edition • Third Printing
Operating Instructions
52 SX-150 • SX-180 Part No. 1262335
Emergency Stop
Push in the red Emergency Stop button to the off
position at the ground controls or the platform
controls to stop all machine functions and turn the
engine off.
Repair any function that operates when either red
Emergency Stop button is pushed in.
Selecting and operating the ground controls will
override the platform red Emergency Stop button.
Emergency Power
Use emergency power if the primary power source
(engine) fails.
1 Turn the key switch to ground or platform
control.
2 Pull out the red Emergency Stop button to the
on position.
3 Press down the foot switch when using the
controls from the platform.
4 Simultaneously hold the
emergency power switch on and
activate the desired function.
The drive functions will not operate with
emergency power.
To Extend and Retract Axles
1 Turn the key switch to platform control.
2 At the platform controls,
press down the foot switch
and move the drive control
handle in either direction
and move the axle switch
in the appropriate direction.
The axle extend and retract indicator lights will
flash while the axles are moving. The axle extend
indicator light will stay on when the axles are fully
extended. The axle retract indicator light will stay
on when the axles are fully retracted.
The axles can only be retracted if the boom is fully
lowered and retracted and the platform is between
the circle-end wheels.