Genie SX-150, Operator'S Manual

Page: 40 / 77

Operator's Manual Second Edition • Third Printing
Inspections
38 SX-150 • SX-180 Part No. 1262335
Test the Jib Rotate Limit
31 At the ground controls, press and hold a
function enable button and press either the jib
boom rotate right button or the jib boom rotate
left button. Rotate the jib boom in line with the
boom assembly.
32 Press and hold a function enable/speed select
button and press the boom extend button.
Extend the boom approximately 3 ft / 91.4 cm.
33 Rotate the jib to the right.
Result: The jib rotation should come to a stop
at 30° from the centerline of the boom
assembly.
34 Rotate the jib to the left.
Result: The jib rotation should come to a stop
at 30° from the centerline of the boom
assembly.
Jib rotate left Jib rotate right
At the Platform Controls
Test Emergency Stop
35 Turn the key switch to platform control.
36 Push in the platform red Emergency Stop
button to the off position.
Result: The engine should shut off and no
functions should operate.
37 Pull out the red Emergency Stop button and
restart the engine.
Test the Horn
38 Press the horn button.
Result: The horn should sound.
Test the Tilt Sensor Alarm
39 Move a toggle switch, such as the engine idle
select switch.
Result: The alarm should sound at the platform
controls.