Second Edition • Third Printing
Operator's Manual
Inspections
Part No. 1262335
SX-150 • SX-180
39
Test the Foot Switch
40
Push in the platform red Emergency Stop
button to the off position.
41
Pull out the red Emergency Stop button to the
on position and do not start the engine.
42
Press down the foot switch and attempt to start
the engine by moving the start toggle switch to
either side.
Result: The engine should not start.
43
Do not press down the foot switch and restart
the engine.
Result: The engine should start.
44
Do not press down the foot switch and test
each machine function.
Result: No functions should operate.
Test Machine Functions
45
Press down the foot switch.
46
Activate each function control handle, toggle
switch or thumb rocker switch.
Result: All functions should operate through a
full cycle.
Test the Jib Rotate Limit
47
Press down the foot switch.
48
Extend the boom approximately 3 ft / 91.4 cm.
49
Move the dual axis proportional control handle
to the right.
Result: The jib rotation should come to a stop
at 30° from the centerline of the boom
assembly.
50
Move the dual axis proportional control handle
to the left.
Result: The jib rotation should come to a stop
at 30° from the centerline of the boom
assembly.
Summary of Contents for SX-150
Page 29: ...Second Edition Third Printing Operator s Manual Controls Part No 1262335 SX 150 SX 180 27 ...
Page 49: ...Second Edition Third Printing Operator s Manual Inspections Part No 1262335 SX 150 SX 180 47 ...
Page 51: ...Second Edition Third Printing Operator s Manual Inspections Part No 1262335 SX 150 SX 180 49 ...
Page 77: ......
