Genie Nano-CL C2450, User Manual

Page: 70 / 118

68
•
Operational Reference Genie Nano-CL Series™
Image Format Control Category
The Nano-CL Image Format controls, as shown by CamExpert, groups parameters used to
configure camera pixel format, image cropping, and selecting a test output image without a lens.
Parameters in gray are read only, either always or due to another parameter being disabled.
Parameters in black are user set in CamExpert or programmable via an imaging application.
Features listed in the description table but tagged as Invisible are usually for Teledyne DALSA or
third party software usage—not typically needed by end user applications. Also important, Genie
Nano cameras are available in a number of models implementing different sensors and image
resolutions which may not support the full feature set defined in this category.
Image Format Control Feature Description
The following table describes these features along with their view attribute and device framework
version. For each feature the device version may differ for each camera sensor available. Such
differences will be clearly indicated for any applicable feature.
A Revision Version number represents the camera software firmware revision. As Genie Nano
capabilities evolve the version will increase, therefore identifying the supported function package.
New features for a major device version release will be indicated by green text for easy
identification.
The first column indicates whether a feature applies to monochrome or color camera models via a
symbol. No symbol indicates a common feature. Additionally the description column will indicate
which feature is a member of the DALSA Features Naming Convention (denoted by DFNC), versus
the GenICam Standard Features Naming Convention (SFNC tag is not shown).