33
9.3 Power Timer
<< Power Timer Setup
Press IRIS OPEN or Joystick Left/Right to enter
Note:
A.You can perform a timed startup and shutdown for the dome.
B.The interval period between startup and shutdown time is the System Startup Operating Status.
While the shutdown time to startup time is the System Shutdown Status.
C.Make sure that startup time is earlier than shutdown time, otherwise the system will remain in the System
Shutdown status.
D.The system will wake for startup once a control command is received. If no control command is received
within 60 seconds (in non-menu status), it re-enters shutdown status.
E.The priority of Assignment is higher than that of the Power Timer. Namely, assignment will be executed first
no matter it is under startup or shutdown status, and the Power Timer can only be entered after the
execution of Assignment has been completed, while other non-Assignment functional operations or
executions will be automatically discontinued before Power Timer is executed.
①
<< Mode Off Joystick Left/Right to select
Off / Eachday / Workday / Weekend / Mon / Tue / Wed / Thurs / Fri / Sat / Sun
②
<< Power On Setup Press IRIS OPEN or Joystick Left/Right to enter
Refer to
Numeric Input Steps Instructions
to set power on time.
③
<< Power Off Setup Press IRIS OPEN or Joystick Left/Right to enter
Refer to
Numeric Input Steps Instructions
to set power off time.
Press IRIS CLOSE to exit
Power On Setup
1 Hour 0
2 Minute 0
3 Second 0
IRIS CLOSE to exit
Power Off Setup
1 Hour 23
2 Minute 59
3 Second 59
IRIS CLOSE to exit
Summary of Contents for GSD106
Page 1: ...GSD106 10x Optical High Speed PTZ Dome Camera User Manual...
Page 9: ...7...
Page 39: ...37 MEMO...
