32
9.2 Assignment
<< Assignment Press IRIS OPEN or Joystick Left/Right to enter
Note
：
You can perform 8 Assignment options, to be executed automatically for the dome system.Namely, to
execute the dome or camera functions automatically at the programmed designated time.
If an executing task is terminated by manual operation, it restarts if a manual operation is not performed
within 10 seconds after stopping.
①
<< Number 1
～
8 Joystick Left/Right to select
Note
：
Assignment Priority: 1-8 (High-Low)
②
<< Program
Press IRIS OPEN or Joystick Left/Right to enter
A) << Property Preset/Vector/Tour/PanScan/DayNight Joystick Left/Right to select
B) << Number
Press IRIS OPEN or Joystick Left/Right to enter
Refer to
Numeric Input Steps Instructions
to set number
Note
：
Number is invalid for the PanScan and DayNight optional functions. It’s used to select certain
specific preset points and the track when the Preset/Vector/Tour is being selected by a specific
assignment.
C) << Mode Eachday Joystick Left/Right to select
Eachday / Workday / Weekend / Mon / Tue / Wed / Thurs / Fri / Sat / Sun
D) << Start Time Setup Press IRIS OPEN or Joystick Left/Right to enter
Refer to
Numeric Input Steps Instructions
to set start time
E) << End time Setup Press IRIS OPEN or Joystick Left/Right to enter
Refer to
Numeric Input Steps Instructions
to set end time
Note
：
If the execution time for the assignment from start to end is less than 3 seconds, this task will
always be executed.
Press IRIS CLOSE to EXIT
③
<< Enable ON/OFF Joystick Left/Right to select
Note:
If set to ON, the assignment is executed at the designated time. Otherwise,this assignment is not
executed, but all data is stored.
Press IRIS CLOSE to EXIT
Start Time Setup
1 Hour
0
2 Minutes 0
3 Seconds 0
IRIS CLOSE to exit
End Time Setup
1 Hour 23
2 Minute 59
3 Second 59
IRIS CLOSE to exit
Summary of Contents for GSD106
Page 1: ...GSD106 10x Optical High Speed PTZ Dome Camera User Manual...
Page 9: ...7...
Page 39: ...37 MEMO...
