28
E) Label Display
OFF
<< Label Display ON/OFF Joystick Left/Right to select
F) Properties Setup
<< Properties Setup Press IRIS OPEN or Joystick Left/Right to enter
a) Property Preset
<< Property Joystick Left/Right to select
Preset / Vector / Tour / PanScan / DayNight / PicStill
b) Number 1
<< Number (Default:1)
Joystick Left/Right to select
Refer to
Numeric Input Steps Instructions
for details.
Note
：
Effective only for Preset / Vector Scan / PTZ Tour
c) Dwell Time 60
<<Dwell time Default: 60 Press IRIS OPEN or Joystick Left/Right to enter
Refer to
Numeric Input Steps Instructions
for details.
Press IRIS CLOSE to EXIT
G) Priority 1
<< Priority (1
～
8) Joystick Left/Right to select
H) Channel Enable OFF
<< Channel Enable ON/OFF Joystick Left/Right to select
※
If set to ON, the dome will take the actions corresponding to the user settings of this channel when an
alarm situation occurs.
※
If set to OFF, this channel will make no response no matter if there’s an alarm situation or not.
Note
:
※
Alarm has the top priority from all the non-functional setting status’.
(Including manual and automatically executed cruising or scanning functions)
※
User who have the operation authority can disable the alarm.
Situation 1. If an alarm occurs when user is manually scanning, the manual scan is stopped for
the alarm execution. It enters the next alarmround only when the alarm is disabled.
Situation 2. It disables the alarm during non-operation time.
Situation 3. When alarm inputs of the same level of priority occur, the lowest numbered channel is
executed first.
Press IRIS CLOSE to EXIT
②
Alarm Out Programming Press IRIS OPEN or Joystick Left/Right to enter
A) Channel Number 1
<< Channel Number (1
～
2) Joystick Left/Right to select
Summary of Contents for GSD106
Page 1: ...GSD106 10x Optical High Speed PTZ Dome Camera User Manual...
Page 9: ...7...
Page 39: ...37 MEMO...
