Genie GSD106, User Manual

Page: 12 / 40

10
<2> All sub-menus can be seen in this tree list
1.Language Options
<<Language Options
Jovstick Left/Right to select
2.Display Options
<<Display Options Press IRIS OPEN or Jovstick Left/Right to enter
2.1.Preset Setup
<<Preset Setup Options
①
Number 1
<<Preset Number Selection Press IRIS OPEN or Jovstick Left/Right to enter
<<The default number after entering is 001 (hundred bit/ten
bit/single bit). Joystick Left/Right to select the Preset position and
press IRIS OPEN to confirm. Joystick Left/Right again to select
numbers (0~~9). Press IRIS OPEN to confirm the selection.
Press IRIS CLOSE to exit to the upper level menu when
programming is complete.
② Set Preset
<<Set Preset Press IRIS OPEN or Jovstick Left/Right to enter
Move the cursor to select the Preset position. Press IRIS CLOSE
to finalise your selection. The screen displays STORED and
returns to the previous menu.
③
Call Preset
<<Call Preset Press IRIS OPEN or Joystick Left/Right to enter
Select the number to be called. Joystick Up/Down to select the Call Preset Menu. Joystick Left/Right or
press IRIS OPEN and the camera moves to corresponding Preset number.
1~255
001
↑
0 1 2 3 4 5 6 7 8 9
IRIS CLOSE when done
IRIS CLOSE when done
STORED
(English/Espanol/Polski)