Genicom Intelliprint cL160 User Manual Download Page 56

Page: 56 / 216

Publication No. GEG-99141

Genicom

Apr 02

2-4

GENICOM Intelliprint cL160 User Guide

Names and Functions of the Printer’s Parts

Rear View

No.

Name

Description

Interface Connector

Connect the printer to your computer or network here.

Power Cord Connector

Connect the power cord here.

Exhaust Grille

Allows internal heat to dissipate. Make sure the grille is never
obstructed.

Toner Cartridges

The black, yellow, magenta, and cyan toner cartridges are
inserted here.

Top Cover
(face down tray)

Acts as the top cover and the face down tray of the printer.
Remove it to change the toner cartridges. Printed documents
are output here, printed side down. Do not operate the printer
without the Top Cover.

Summary of Contents for Intelliprint cL160

























































































































































































































Search results

Summary of Contents for Intelliprint cL160

Reviews:

Related manuals for Intelliprint cL160

Brands by name

Popular brands

Genicom Intelliprint cL160, User Manual

Search results

Summary of Contents for Intelliprint cL160

Reviews:

Related manuals for Intelliprint cL160

Brands by name

Popular brands