Apr 02
Genicom
Publication No. GEG-99141
GENICOM Intelliprint cL160 User Guide
7-17
System Menu
System Menu
The system menu provides access to system settings. Use the following procedure to enter the sys-
tem menu:
1.
Press the
MENU
button on the control panel.
2.
Press the
NEXT
button until the text “
System Menu
” is shown on the second line of the
display.
3.
Press the
SELECT
button to enter the system menu.
4.
Press the
NEXT
button to move through the submenus:
Factory Defaults, Display
Language, Power Saver, Wait Timeout, Job Timeout, Jam Recovery, Hex Print, and
Toner Out.
5.
Press the
SELECT
button to enter a submenu.
6.
Use the procedures in the following table to access and change the system settings:
Submenus
Default Setting
Available Settings
Procedure for Changing Setting
Factory Defaults
This submenu allows you to reset
the printer to U.S. or Non-U.S.
factory defaults.
U.S.
U.S.
Non-U.S.
1. Press NEXT or PREVIOUS to toggle
between U.S. and NON-U.S.
2. Press SELECT to choose and set the
factory defaults.
Display Language
This submenu allows you to change
the language of the display
messages.
English
English
Francais (French)
Deutsch (German)
Italiano (Italian)
Espanol (Spanish)
1. Press NEXT or PREVIOUS to scroll
through the available languages:
English, French (Francais), German
(Deutsch), Italian (Italiano), or
Spanish (Espanol).
2. Press SELECT to choose and set the
language.
Alarm Control
This submenu allows you to set the
alarm control.
Single
Single
Continuous
Off
1. Press NEXT or PREVIOUS to move
among the alarm settings.
2. Press SELECT to choose and set the
alarm setting.
Power Saver
This submenu allows you to set the
number of minutes the printer is
idle before it reverts to Power
Saver Mode.
15
0 - 999
1. Press NEXT or PREVIOUS to
increase or decrease the number of
minutes.
2. Press SELECT to save this setting.
Wait Timeout
This submenu allows you to
increase or decrease the length of
time (in seconds) that the printer
will remain in the waiting state—a
job is being processed, no
end-of-file has been detected, and
there is no more data to process.
This setting applies to
both PCL
and PostScript print jobs.
20
0 - 99999
1. Press NEXT or PREVIOUS to
increase or decrease each digit of
the five-digit number.
2. Press SELECT set one digit and
move to the next digit.
3. Press SELECT after changing the
last digit to save this setting.
