Genicom Intelliprint cL160 User Manual Download Page 51

Page: 51 / 216

Apr 02

Genicom

Publication No. GEG-99141

GENICOM Intelliprint cL160 User Guide

1-31

Turning the Printer Off

NOTE:

You may toggle between PCL Fonts and Postscript Fonts using the PREVIOUS or NEXT
push-buttons.

Press SELECT. A multi page resident Font List will print. Examples of a PCL and PostScript
Font Lists appears in Appendix C of the

Intelliprint cL160 User’s Guide

located on the

GENI-

COM Intelliprint CL160 Electronic Library

Turning the Printer Off

Remember to turn off the printer at the end of day or when the printer will not be used for an
extended period of time.

NOTE:

When the printer is turned off, all print data still in memory will be erased.

Set the power switch to the [0] position to turn off the printer.

Summary of Contents for Intelliprint cL160

























































































































































































































Search results

Summary of Contents for Intelliprint cL160

Reviews:

Related manuals for Intelliprint cL160

Brands by name

Popular brands

Genicom Intelliprint cL160, User Manual

Search results

Summary of Contents for Intelliprint cL160

Reviews:

Related manuals for Intelliprint cL160

Brands by name

Popular brands