
Rocket 4D Evaporation System
User Manual
54
04-7848 Issue 2-4 August 2014
Warranty statement
Returning equipment to Genevac
This product is guaranteed for period of 12
months from the date of delivery. In the
unlikely event of any defect arising due to
faulty materials or construction resulting in
system failure, the unit will be repaired free of
charge. This includes all labour and
component costs incurred. This warranty is
subject to the following provisions:
The system must be sited, installed and
operated in accordance with instructions in
this user manual.
Exhaust vapours must be ducted away
from the system as described in the
Unpacking and Setting Up
section in this
user manual.
The system is only used for the purpose
for which it was sold and in accordance
with the Genevac published compatible
solvents list.
Preventive maintenance and cleaning must
be carried out as detailed in the
Maintenance
section of this user manual.
Power lead(s) supplied with the system,
are for use with that system only.
If items are replaced by the owner, only
Genevac approved parts may be used.
In the event of a vacuum pump failure, the
pump may be exchanged for a refurbished
unit.
Failure to adhere to the above will invalidate
the warranty and result in a charge being
made for the cost of repairs. This warranty
does not cover accidental damage,
modification, misuse or inappropriate repair by
untrained personnel. Consumable items are
covered against manufacturing defects only;
for a for a list of these items, see
Maintenance
–
Consumable items
.
The equipment is supplied in reusable
packaging. Where possible, this should be
retained for reuse in the unlikely event that
system needs to be returned for repair. If
the packaging is not retained, a charge will
be made for replacement packaging and
any shipping costs incurred.
Genevac will not accept any delivery of
equipment which is not accompanied by
appropriately completed Safety Declaration
paperwork. This applies to all equipment
and / or parts.
To obtain the necessary Safety Declaration
paperwork, or for details of Returns
Authorisation procedures, contact your
local Genevac representative or Genevac
Service Department. Contact details are
shown on the back cover of this user
manual.
Chiller warranty and service
Please read the Julabo Operating Manual
fully and refer to it for details of warranty
conditions. Your attention is drawn to the
option to extend the product warranty
period to two years.