REGULATORY NOTICES
2
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
CE Notice (European Union)
Marking by the CE Symbol indicates compliance to the EMC Directive and the Low Voltage
Directive of the European Union. Such marking is indicative that the Genesys
series
GEN2400W meets the following technical standards:
EN 55022:2007+A1:2009 -”Limits and Methods of Measurement of Radio Interference
Characteristics of Information Technology Equipment.”
EN 55024:1998+A1:2001+A2:2003-”information thecnology equipment - Immunity
characteristics - Limits and methods of measurement.”
EN 60950-1:2006+A11:2009 - “Safety of Information Technology Equipment.”
A “Declaration of Conformity” in accordance with the preceding directives and standards has been
made and is on file at our EU representative TDK-Lambda Limited, located at Kingsley Avenue,
Ilfracombe, Devon EX34 8ES, UK.
TM
•
•
•
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
WARNING:
Modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment under FCC Rules.
WARNING:
This is a Class A product. on a domestic environment this product may cause radio
interference in which case user may be required to take adequate measures.
SAFETY APPROVALS:
UL 60950-1:2007 Second Edition, UL Listed, C-UL for Canada, IEC
60950-1:2005 Second Edition, CE marking, when applied to the GEN2400W product, indicates
compliance with the Low Voltage Directive 2006/95/EC in that it complies with EN 60950-
1:2006/A11:2009.
2
Summary of Contents for GEN10-240
Page 2: ...This page intentionaly left blank...
Page 3: ......
Page 8: ...This page intentionaly left blank...
Page 80: ...NOTES...