Copyright of the European Union is effective (Copyright EU) (c) 2016 GENEREX GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL [email protected] - WEB www.generex.de (This and all other product datasheets are available for download.)
7
2.1.1
Analog input at RJ12 connectors
Figure 4:
SiteManager II/v3 RJ12 connectors
The 4 RJ12 connectors contain each 2 analog input channels whereby it is possible to connect 8
analog sensors. Please see the figure below how to connect the different sensors at the RJ12
connectors. For the pin layout of the input sockets see the particular section in the appendix.
Figure 5:
Sensor connections at the analog input RJ12
2.1.2
Analog input at open sockets Rev.A
While the RJ12 connectors are unused the analog input is also available at the open sockets A01-
A08.
Figure 6:
Analog input sockets
See the following figure how to assign the pins. Mind that the input signal must be in the range
between 0-10V DC.
