Generalmusic RealPiano RP150, Owner'S Manual

Page: 37 / 76

33
9. Damper Pedal Assign (Damp. Assign)
Press the PAGE UP button to pass to the Damper Assign function.
This function allows you to assign the Damper pedal to the sections
(Single, Layer or Split) of the current Preset. The first screen to be shown
corresponds to the Single situation set to On:
9 DAMP ASSIGN
ON
For example, if you mixed a main Piano and secondary Strings sound
(layered combination) and you wanted the damper pedal to sustain the
piano but not to affect the strings, you would set the Damper Assign On
to the main single sound and Off to the Layer sound.
The default setting for this parameter is shown in the following table:
Main Split Layer
On Off On
You can modify the default status for the current Preset section to suit
your needs.
Press the LAYER button (LED on) followed by PAGE Up to activate the
Layer screen (identified by the letter “L”).
9L DAMP ASSIGN
ON
Press the SPLIT button (LED on) followed by PAGE Up to activate the
Split screen (identified by the letter “S”).
9S DAMP ASSIGN
OFF
NOTE: When you pass directly from Layer to Split situations (or vice-
versa), there is no need to press the Page Up button to see the relative
display.
To change the On/Off status of the Damper Assign function, use the
DATA +/– buttons.