Generalmusic RealPiano RP150, Owner'S Manual

Page: 22 / 76

18
BRILLIANCE –\+
The BRILLIANCE controls in the Control section allow you to adjust the
brightness of the instrument’s tone. Brilliance affects the instrument as
a whole and cannot be applied independently to individual sounds.
When both LEDs are off, the tone of the instrument is normal.
To change the Brilliance setting
:
• Press BRILLIANCE – to activate the Loudness setting:
The Brilliance – button gives a softer tone (enhancement of the bass
frequencies).
• Press the currently deactivated BRILLIANCE button to activate the
Normal setting (in this case Bril). The LED of the active
button will cancel.
• Press BRIL to activate the Bright setting.
The Bril button gives a brighter tone (enhancement of the
high frequencies).
TRANSPOSE
Pressing either TRANSPOSE button will adjust the pitch of the instrument
in half-step (semitone) increments or decrements, through the overall
range of –/+ 12 semitones.
When both LEDs are off, the pitch of the instrument is set to normal
(Equal: C = C).
To Transpose the instrument
1. Press TRANSPOSE #.
The pitch of the instrument is raised one semitone and the amount
of transposition is displayed as a relative value for a short period.
* TRANSPOSE *
+1 C = C#
After about 5 seconds, if you don’t press either Transpose button,
the display returns to the previous situation and the instrument
remains at the last set pitch.
Every time you press the TRANSPOSE # button, the pitch is raised
by one semitone.