Generalmusic RealPiano RP150, Owner'S Manual

Page: 34 / 76

30
5. Reverb Decay Time (Rev. Time)
Press the PAGE UP button to pass to the Rev. Time function.
Unlike the Rev Send function, the Rev. Time page affects all three
sections of the current Preset, therefore, only one screen appears
regardless of the status of the Single, Layer or Split mode.
If a Reverb effect has been selected (Reverb button on), the Rev. Time
function can be used to control the “reverb time”, or the delay amount for
the particular reverb type selected for the current Preset. Basically, this
allows you to proportionally increase or decrease the dimensions of the
surroundings simulated by the DSP.
Pressing Page Up activates the following display:
5 REV. TIME Sec.
2.0
Holding down the DATA + or – button increases or decreases the Rev.
Time value rapidly and stops instantly after release. The value obtained
is expressed in seconds.
Note: To listen to the changes made, the Reverb button must be selected
(LED on).