Generalmusic RealPiano RP150, Owner'S Manual

Page: 12 / 76

8
Realtime operations
The RP150 operating system has been conceived to permit several
simple and quick real time operations.
• Activate Split mode
Starting from the Single Preset “GrandPiano”, you can easily split the
keyboard by pressing the SPLIT button. This will divide the keyboard into
separate left and right sections.
<------- Ac. Bass ------><--------- GrandPiano ---------->
After pressing the SPLIT button (the LED turns on), the GrandPiano
sound remains active on the right side of the split. An Acoustic Bass
sound is automatically assigned on the left side of the split.
If you press the SPLIT button again, the LED will turn off and the keyboard
returns to the previous mode with the GrandPiano sound active to play
across the entire keyboard.
• Change the sound assigned to a Split
When you press the SPLIT button, for an instant (about 5 seconds) the
display shows the sound assigned to the left split together with the current
split point setting:
After the temporary period, the display returns to normal showing the
starting situation (in this case the GrandPiano display).
1. Press the SPLIT button.
2. While the temporary display is shown, press the DATA +/– buttons
to scroll the various sounds.
In this case, pressing the DATA + button will change the sound
assigned to the left keyboard section from Ac.Bass to RideBass,
then to El.Bass and so on, cyclically through the entire Sound data
base (see the Sound Program table on page 26 of this manual).
LEFT: Ridebass
SPLIT Point :F#3
...
LEFT: El.Bass
SPLIT Point :F#3
...
Clearly, if you use the DATA – button, you can scroll the sounds in
reverse order.
Left Split sound
Split Point note