Generalmusic RealPiano RP150, Owner'S Manual

Page: 29 / 76

25
1. Sound Program
The Sound Program is a fundamental function which determines the
instrument’s timbre.
Once selected, to change the Sound Program, simply press the DATA +/–
buttons to select the next or previous Sound Program (see the complete
Sound Program list on the next page).
1 SOUND PROGRAM
N.1 Grand P1
1 SOUND PROGRAM
N.2 Grand P2
As in all selection procedures, the Sound Program selection is cyclic. The
DATA + button selects in increasing order of Program change while the
DATA – button selects in the reverse order.
Up to this point, the changes described above apply to the single Preset
selected at the beginning (GrandPiano in this case).
Modify the Layer
It is also possible to modify the Layer status of the current Preset.
With the Sound Program function still active, press the LAYER button.
The programmed Layer sound (in this case Strings) is added to the main
sound. To view the Layer sound, simply press the PAGE UP button:
1L SOUND PROGRAM
N.29 Strings
To change the Layer sound, proceed as already described, by using the
DATA +/– buttons to select the required Sound Programs.
1L SOUND PROGRAM
N.29 Strings
1L SOUND PROGRAM
N.30 Slow Str
Modify the Split
The Split status of the current Preset can also be modified using the same
method described for the Layer situation.
Press the SPLIT button followed by the PAGE UP button to view the Split
sound (in this case, Ac. Bass):
1S SOUND PROGRAM
N.44 Ac.Bass
Letter “L” to indicate
the LAYER Preset
Letter “S” to indicate
the SPLIT Preset