Generalmusic Promega 2, Owner'S Manual

Page: 16 / 47

Generalmusic Promega 2 Page13
Now you’ve selected PRESET C4 and the instrument has changed all it’s
settings. Let’s switch back to the sound we stored in USER A1 and check
that it was memorized correctly.
Press the USER button
Press the A button
Press the 1 button
Now that we know how to use the performance memories let’s store something
into one of the USER locations.
First we’ll start by selecting the main piano sound in PRESET A1.
Press the A button.
Press the 1 button.
You should now hear the main piano sound. From this stage, were going to
re-create the piano/strings combination we made back in Example 1. Turn
back to Example 1 and follow all the steps to layer a string sound with the
piano.
Now we’re going to store this sound into USER A1.
Press the STORE button
Press the A button
Press the 1 button
You’ll notice that the PRESET button automatically turned off and the USER
button turned on. Because you pressed STORE, the instrument switched itself
into user mode. If you want go back to selecting factory presets, you need to
press PRESET again. Let’s check that our sound was stored correctly by
switching to a PRESET memory and then switching back to our newly stored
USER A1.
Press the PRESET button
Press the C button
Press the 4 button
EXAMPLE 7: Storing your own creations
Press 4.
Now that you are in PRESET BANK 4
you can listen to the 8 different
memories with a single button press
as before.
J
J
J
J
J
Moving to a different bank requires 2 steps. The first step is where you select the new bank.
The second step is where you choose a memory within the newly selected bank. You will not
hear the sound change until you have completed this second step. Let’s select PRESET C4.
Press the C button.
Notice that the memory
buttons start to flash. The only
buttons not flashing are those
which represent the previous
selection.