General Music WX2 Owner'S Manual Download

Page: 202 / 226

6 - 20

Owner's Manual

Edit Sequencer

Sequencer

NAME

This function allows you to give your recorded songs a name:

In the above display situation, the keyboard activates as an alphanumeric source.

Song mode allows you to specify:

Song File name

here you can enter an abbreviated name - this is the name that
will appear in the display and disk files;

Song Title

here you can enter the Song’s full title;

here you can specify the Song’s composer;

here you can specify the name of the group or body who own
the rights of the lyrics and Song.

Use the Up/Down cursor arrows to move from zone to zone.

Song Styles and Programmable Styles allow you to specify the Song File name only.

How to use the keyboard

The letters, the numbers and other symbols are silk-screened under the keyboard and they
are entered into the active zone by pressing the relative keys. The flashing cursor moves
one step to the right after each entry.

Several functions are provided on the extreme left side of the keyboard.

◆

Press “Shift” to write capital letters;

◆

Use “Space” to create a space;

◆

Use “Delete” to cancel the entry at the flashing cursor position;

◆

Use the arrow “left arrow” (<—) to cancel the last entry;

◆

Use the “back space” (

) to move the cursor backwards.

◆

Other symbols (apostrophe, comma, etc.) are located on the extreme right
side of the keyboard.

A File name consisting of up to 8 characters can be written.

All other name writing zones in Song mode allows up to 24 characters.

Press ENTER to confirm the name.

Press ESC to escape the function and cancel all entries.

Summary of Contents for WX2



































































































































































































































Search results

Summary of Contents for WX2

Reviews:

Related manuals for WX2

Brands by name

Popular brands

General Music WX2, Owner'S Manual

Search results

Summary of Contents for WX2

Reviews:

Related manuals for WX2

Brands by name

Popular brands