Model FL3112
12
Figure 3-C Base Assembly with Terminal Block
3.6 Terminal
Connections
The Terminal Block is located on the Base Assembly (
See figure 3-C
) and accepts 12
AWG (3.31 mm
2
) to 22 AWG (0.33 mm
2
) stranded or solid core wire. Each wire should be
stripped as shown in figure 3-D.
Figure 3-D Strip Length
Four of the six positions on the terminal block have functions which depend on the FL3112
version selected. The remaining two positions are reserved for the power connections.
Figure 3-C outlines the terminal block connections by version.
On this and the following pages is a description and specification for each of the signals
shown in figure 3-C.
