Note:
This is the Security screen as seen when both Supervisor and User passwords are installed.
Field
Setting
Function
Set
Supervisor
Password
Enter
New
Password
Supervisor Password controls access to the Setup
Utility
Power on
password*
Enabled
Disabled
If enabled, system will ask for password on post time.
If disabled, system will ask for password when
entering setup utility.
User
Access
Level*
View
Only
Limited
Full
If View Only, no system changes may be made by the
user. If Limited, some system changes may be made.
If Full, the user may make any system changes
except Supervisor Password.
Set User
Password
Enter
New
Password
User Password controls access to the system
Clear User
Password**
Yes
No
Removes the User Password.
Set All Hdd
Password
Enter
New
Password
Use the hard disk drive password to prevent
unauthorized access to the hard disk
S3 Resume
Security
Enabled
Disabled
If enabled, Resume S3 will check the BIOS and
Harddisk security
Page 51 of 70
VR-2 Help
4/26/2007
file://C:\Documents and Settings\harwoodm\Local Settings\Temp\~hh3F7F.htm
