Xedge Hardware Overview
Xedge LIM Overview
032R440-000
Xedge 6000 Hardware
1-15
Issue 17
Installation & Setup Guide
Note
1. Xedge PCX in the above table refers to both PCX and PCX2, except where noted.
Note
2. ASIO-HSSI (DCE) supports higher speed serial interfaces up to 51.82 Mbps.
Future models of the ASIO LIM (ASIO-TTL and ASIO-HSSI DTE) will support additional interfaces.
155E-2
ECC
Dual port, STM-1 Electrical LIM for ATM service
353,207
149.76
155.52
DSX1-IMA
ECC only
16 link Inverse Multiplexing for ATM service
3,592
1.523
1.544
E1-IMA
ECC only
16 link Inverse Multiplexing for ATM service.
4,490
1.904
2.048
DSX1-IMA+
PCX, PCL
16 link Inverse Multiplexing for ATM service.
3,592
1.523
1.544
E1-IMA+
PCX, PCL
16 link Inverse Multiplexing for ATM service.
4,490
1.904
2.048
HSSI-DTE
ACP, PCX
High speed, dual-port, DTE serial interface
114,615
51.84
51.84
HSSI-DCE
Future
High speed, dual-port, DCE serial interface
114,615
51.84
51.84
SI-2C
CE
Dual port, serial RS422/RS423 compatible, software
selectable data clock, RS449, EIA/TIA530, V.35,
X21, DCE or DTE input capabilities
n/a
selectable clock rate
2.4-8192kHz
ACP.
PCX
19,321
SI-4C
CE
Quad-port, serial RS422/RS423 compatible,
software selectable data clock, RS449, EIA/TIA530,
V.35, X21, DCE or DTE input capabilities
n/a
selectable clock rate
2.4-8192 kHz
ACP
19,321
ASIO
(Standard)
Dual or Quad port adaptive serial EIA-530A, EIA-449, ITU-T X.21,
ITU-T V.35 and RS-232 interfaces (via programmable Smart
Cable connector). See Note 2. below.
from 75 bps to 10 Mbps per port
(See note below)
CE
2/4 ports, from 2.4 to 8,192 Kbps
ACP
2 ports, up to 10 Mbps per port
PCE
4 ports, up to 4.65 Mbps per port, 9.3 Mbps total all ports;
2 ports, up to 10 Mbps per port
PCX/PCX2 2 ports, up to 10 Mbps per port
OC-N/STM-N
PCX
8-port optical LIM for Singlemode or Multimode SFPs 1,412,830
OC3:155.52
OC12:622
OC3:155.52
OC12:622
AVM
PCX2 only LIM, 12 port Analog Voice LIM
n/a
64K analog
64K analog
T1/E1 MP
PCX2 only LIM, 16 port T1/E1 Multi-Protocol LIM
n/a
T1: 1.544
E1: 2.048
T1: 1.544
E1: 2.048
T1/E1 HDCC
PCX2 only LIM, 28/32 port T1/E1 High Density Cross Connect
LIM with DS3/E3 and OC3/OC12 ports
n/a
T1: 1.544
E1: 2.048
DS3: 44.736
OC3:599.03
1.544
2.048
44.736
622
Table 1-5
Xedge Controller/LIM Performance Matrix (Continued)
LIM
Controller LIM and Slot Controller Description
Maximum Per Link
Physical
Link Rate
(Mbps)
Cell Rate
(cps)
Data Rate
(Mbps)
