Electrical Connections
24
Installation and Owner’s Manual for Generac PWRCell Inverter
Verifying Connectivity
NOTE:
Use a laptop or other device to verify the Internet
connection on the field installed Cat 5 cable.
For a successful connection the following must be valid:
•
The Internet LED on the control panel must be lit.
NOTE:
Wait at least 5 minutes after the blue light illumi
-
nates to be certain the connection is stable.
•
The field installed Cat 5 cable must have a “hot”
signal. Check male RJ45 ends for proper
installation and confirm correct Ethernet ports at
the inverter and router.
•
The REbus Beacon must have a device page on
the inverter control panel.
•
See
. The REbus Beacon must have a
valid IP Address. Log on to the Beacon Installer
Configuration Tool to verify.
See
Figure 5-13. Verify IP Address
NOTE:
After first installing, the REbus Beacon may need
to receive automated updates to its firmware. This may
cause the blue Internet LED to strobe while the Beacon
updates, and this will interrupt the Installer Tool connec
-
tion momentarily.
012423
Summary of Contents for PWRcell X11402
Page 63: ......
