17973 G
MLT6SM/K-8SK Operating Manual
1
Section 1 - Safety
SAFETY NOTES
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible injury or death.
This manual contains DANGERS, WARNINGS, CAUTIONS, NOTICES and NOTES which must be
followed to prevent the possibility of improper service, damage to the equipment, personal injury or death.
The following formatting options will apply when calling the readers attention to the DANGERS, WARN-
INGS, CAUTIONS, NOTICES and NOTES.
DANGER
INDICATES A HAZARDOUS SITUATION WHICH, IF NOT AVOIDED, WILL RESULT IN
DEATH OR SERIOUS INJURY.
WARNING
Indicates a hazardous situation which, if not avoided, could result in death or serious
injury.
CAUTION
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
Indicates a hazardous situation which, if not avoided, could result in property or equipment
damage.
Note: Notes contain additional information important to a procedure and will be found within the regular text body
of this manual.
OPERATING SAFETY
Before using the unit, be sure to read and understand all of the instructions. This equipment was
designed for specific applications;
DO NOT
modify or use this equipment for any application other than
which it was designed for. Equipment operated improperly or by untrained personnel can be dangerous.
Read the operating instructions and familiarize yourself with the location and proper use of all instruments
and controls. Inexperienced operators should receive instruction from someone familiar with the equipment
before being allowed to operate or set up the unit. The following points should be practiced at all times:
•
The area immediately surrounding the unit should be dry, clean, and free of debris.
•
Position and operate the unit on a firm, level surface.
•
NEVER
start a unit in need of repair.
•
If the unit is equipped with a frame grounding stud, follow any local, state, and National Electrical
Code (NEC) guidelines when connecting.
•
NEVER
operate the unit on a combustible surface.
•
NEVER
operate a unit while tired, distracted, or under the influence of drugs or alcohol.
•
Keep all body parts, clothing and other loose items away from moving parts.
•
ALWAYS
lower the mast when not in use, or if high winds or electrical storms are expected in the area.
•
The mast extends up to 23 ft (7m).
ALWAYS
make sure the area above the unit is open and clear of
overhead wires and obstructions.
•
Keep area around the unit clear of people while raising and lowering the mast.
Summary of Contents for MLT6SK
