Generac Mobile Products MLT6SK, Operating Manual

Page: 21 / 36

General Information
17973 G MLT6SM/K-8SK Operating Manual 15
PRESTART CHECKLIST
Before starting the unit, all items in the prestart checklist must be completed.

Read and understand ALL safety sections at the beginning of this manual.

Ensure all maintenance procedures are up to date. For more information, refer to “General
Maintenance” on page 27 and Basic Maintenance Schedules beginning on page 28 .

The unit must be level with jacks firmly in contact with the ground and wheels lifted approximately 1
inch (2.5 cm) off the ground.

The unit must be dry. Check for any water inside, on, or near the unit; dry if needed.

For grounding requirements, follow any local, state or National Electrical Code (NEC) guidelines.

Switch the Control Power switch to the OFF (O) position.

Switch all circuit breakers to the OFF (O) position.

Inspect all electrical cords; repair or replace any that are cut, worn, or bare.

Ensure all winch cables are in good condition and centered on each pulley. Do not use if cables are
kinked or beginning to unravel.

Check oil, coolant, and fuel levels. For more information, refer to “Basic Maintenance Schedule -
Mitsubishi Engine” on page 28 .

Ensure battery connections are secure.

Check the engine fan belt tension and condition.

Check the engine fan belt guard.

Check the engine exhaust system for loose or rusted components.

Ensure the enclosure is secure.