LRAD
450XL
GENASYS INC.
Manual Part No.: 112343-00 Rev. E
39
Apply a
continuous bead
of RTV in both
sealing grooves
Apply RTV in sealing
grooves around cable
egress
Apply RTV in sealing
grooves underneath
cable as well
Figure 29: Application of RTV on Driver
•
After connecting the internal driver connector, perform the Driver Resistance Test to ensure
that the connector has made good contact prior to sealing the Driver Cap.
•
Apply RTV liberally to the areas shown in the figure below prior to closing the Driver Cap
with the Torx screws. Do not overtighten the Torx screws.
•
Replace the front screen after installing the new driver. Apply anti-seize compound to the
screws before installing.
