LRAD
450XL
GENASYS INC.
Manual Part No.: 112343-00 Rev. E
26
To record and playback audio using the recording microphone, reference Figure 20 and take the
following steps:
1. Connect the microphone to audio input using the D38999 Connector.
2. Press and hold the RECORD button (2).
3. While holding the RECORD button, press and hold the PLAY button (3).
4. The recording/playback indicator LED(4) will turn green to indicate that the unit is
recording.
5. The unit will record as long as the RECORD and PLAY buttons are held down and as long
as there is storage space in the internal memory.
6. Speak your message into the microphone element (5) and release the RECORD and PLAY
buttons when done speaking.
7. Press and release the PLAY button to initiate playback of the recording. The
recording/playback indicator LED will flash once when the recording has finished
playback.
8. Press and release the PLAY button again to halt playback of the recording.
Additional Notes
•
The recording will be stored on non-volatile memory, so the recording will persist even
after the LRAD is powered down.
•
Repeating this record sequence will overwrite the recording on the microphone.
•
The microphone will only store one recording at a time.
Figure 20: Recording Microphone Features and Controls
PUSH TO TALK (PTT)
RECORD (REC)
PLAY
RECORDING/
PLAYBACK INDICATOR
LED
MICROPHONE
ELEMENT
1
2
3
4
5
