36 / 48
1283
8 Changing
parameters
8.1
Changing the set value or parameter value
To change the set value or a parameter value, select the respective parameter (P:01...) and
then press the
key. Now the respective value can be changed using the
and
keys.
Example:
Changing the set value manually from 32.0 % to 31.9 %.
Display flashes
Display flashes
9 Commissioning
9.1
Use of the 3-point controller for positioning a motorized actuator
9.1.1 Initial commissioning without factory setting
(
when supplied without a
mounted motorized actuator
)
G
Carry out the mechanical mounting (see chapter 4)
G
Connect the signal inputs (see chapter 5.2.1)
G
Connect the supply voltage (see chapter 5.1)
G
Carry out automatic initialisation as described below:
If there is an error message during initialisation please
proceed as described in
chapter 11 Error messages
.
The GEMÜ 1283 is now ready for operation.
Summary of Contents for 1283
Page 9: ...9 48 1283 bl blau or orange gr grau ...
Page 31: ...31 48 1283 bl blue or orange gr grey ...
Page 46: ...46 48 1283 ...
Page 47: ...47 48 1283 ...
