11
2.6 Connecting the Access Point
Your Access Point is now ready to be connected to a power outlet and
to your wired network.
You can find the power input and the Ethernet port on the left hand
side of the Access Point.
Figure 2-4 Connecting the Access Point
2.6.1 Power adapter
The Access Point package contains a power adapter. To connect it:
1. Plug it into the Access Point.
2. Plug the power cord into the adapter.
3. Plug the power cord into a power outlet.
4. Check the power LED (the middle of the three LEDs). If it is ON,
you are connected properly.
2.6.2 Ethernet port
The Ethernet port (an RJ45 socket) can be found next to the power
connector on the Access Point.
For a wired connection, attach the Ethernet cable to the Access Point
and connect the cable on the other end to either a hub in the network,
or a computer.
If you want to connect to an Access Point via a wired connection, it
must be connected correctly:
˙
if the Access Point is connected to a hub or switch, a ‘Normal’ (not
a crossover) cable must be used
˙
if the Access Point is connected directly to a computer, a crossover
Power
Ethernet Port
Reset
