User’s Guide
Chapter 7 – Reference Manual
Chapter 7 – Reference Manual
This chapter contains Hotspot-in-a-Box web management reference information.
The
web
management
main menu consists of the following sub menus:
Network
Interface
– device configuration settings affecting networking.
User
Interface
– device configuration settings affecting the user interface.
System
– device system configuration settings directly applicable to the controller.
Connection
– device settings related to user’s connection with the P560.
Exit
– click exit and leave the web management then close your web-browser window.
Web Interface
The main
web
management
menu is displayed at the top of the page after successfully logging into
the system (see the figure below). From this menu all essential configuration pages are accessed.
Figure 38 – Main Configuration Management Menu
By default the
system | status
menu is activated and the current AC system status is displayed. The
active menu is displayed in a different color.
The
web
management
menu has the following structure:
Network Interface
Configuration
– configuration page for all controller network interfaces
Interface
configuration
– network interfaces configuration
VLAN
– define VLAN on your controller
Route
– define new static route on the controller interface
Port
forwarding
– port-forwarding rules
Management
subnet
– access points (APs) management
DNS
– define DNS server settings
DHCP
– Dynamic Host Configuration Protocol services configuration
RADIUS –
configuration set for RADIUS servers, includes menu:
RADIUS settings
– NAS server ID, hotspot operator name and other settings
RADIUS servers
– accounting, authentication RADIUS servers IP, port and other settings
WISP
– add new WISP on the system.
Proxy –
configure the AC to act as RADIUS server proxy.
Accounting backup
– backup authentication logs in the remote or external server
Tunnels –
set tunnels:
PPPoE/PPTP/GRE
for
DSL
– connect to ISP via the PPPoE, PPTP or GRE tunnel
PPTP
client
for
VPN
– configure PPTP client for Virtual Private Networks
GRE
client for VPN
–set the GRE (Generic Routing Encapsulation) tunnel for the P560
Wireless
– wireless interface configuration
Basic –
SSID,
regulatory domain, WEP keys
Advanced –
channel selection, layer 2 client isolation and other settings
Security –
WEP and WPA
ACL –
access control default policy, static ACL, access control by MAC address
WDS
– access point and WDS modes
User Interface
Configuration
–Welcome/Login/Logout/Help page customization
Gemtek Systems
Page 50
