Setting the computer IP address in Windows 7
Gemini Profiling System
0695-SOM-00001, Issue: 03
65
© Tritech International Ltd.
A list of attached network devices should now present itself. Find the one which the
sonar is to be connected to and double-click on it.
The
Local Area Connection Properties
dialog should be displayed. Find
the entry labelled
Internet Protocol Version 4 (TCP/IPv4)
, select it
and then click on the
Properties
button.
In the properties dialog which opens there will either be
Obtain an IP address
automatically
or
Use the following IP address
selected. If an IP
address is already present, make a note of it before changing any values since it will be
needed if the computer is ever restored to the previous network. Refer to appropriate
section of this manual for the correct IP addresses to use.
