Gemini 620pd Profiling Page 54 Product Manual Download

Page: 54 / 72

Gemini Software Operation

Gemini Profiling System

0695-SOM-00001, Issue: 03

© Tritech International Ltd.

If more than one Gemini Sonar is connected and powered, its details will appear

on the System Data screen. The currently active sonar will have green text and the

dormant sonar(s) will be in yellow.

For a multiple sonar setup the arrows allow the list of sonars to be scrolled.

12.5. Serial Data Input

12.5.1. Sensors

The

Sensors

tab is for displaying extra information from connected RS232 sensors.

Note

The

Settings

field of the

Sensors

tab is only active if logging is

taking place. Within the

Settings

field the actions of the operator are

recorded so that during play back of the log file it is possible to see which

settings have been changed.

12.5.2. Gemini Hub

Note

The Gemini software only supports connection to

one

Gemini Hub.

Hubs Tab

The

Hubs

tab shows the status information from any connected Gemini Hubs.

Summary of Contents for 620pd Profiling









































































Search results

Summary of Contents for 620pd Profiling

Reviews:

Related manuals for 620pd Profiling

Brands by name

Popular brands

Gemini 620pd Profiling, Product Manual

Search results

Summary of Contents for 620pd Profiling

Reviews:

Related manuals for 620pd Profiling

Brands by name

Popular brands