Gemini 620pd Profiling Page 6 Product Manual Download

Page: 6 / 72

Gemini Profiling System

0695-SOM-00001, Issue: 03

© Tritech International Ltd.

Help & Support

First please read this manual thoroughly (particularly the Troubleshooting section,

if present). If a warranty is applicable, further details can be found in a Warranty

Statement at the end of the manual.

Tritech International Ltd

can be contacted as follows:

Mail

Tritech International Ltd

Peregrine Road

Westhill Business Park

Westhill, Aberdeenshire

AB32 6JL, UK

Telephone

++44(0)1224 744 111

Fax

++44(0)1224 741 771

[email protected]

Website

www.tritech.co.uk

Prior to contacting

Tritech International Ltd

please ensure that the following is

available:

1. The Serial Numbers of the product and any

Tritech International Ltd

equipment

connected directly or indirectly to it.

2. Software or firmware revision numbers.

3. A clear fault description.

4. Details of any remedial action implemented.

Contamination

If the product has been used in a contaminated or hazardous environment

you

must

de-contaminate the product and report any hazards

prior

returning the unit for repair.

Under no circumstances should a product be

returned that is contaminated with radioactive material.

The name of the organisation which purchased the system is held on record at

Tritech International Ltd

and details of new software or hardware packages will be

announced at regular intervals. This manual may not detail every aspect of operation

and for the latest revision of the manual please refer to

www.tritech.co.uk

Tritech International Ltd

can only undertake to provide software support of systems

loaded with the software in accordance with the instructions given in this manual. It

is the customer's responsibility to ensure the compatibility of any other package they

choose to use.

Summary of Contents for 620pd Profiling









































































Search results

Summary of Contents for 620pd Profiling

Reviews:

Related manuals for 620pd Profiling

Brands by name

Popular brands

Gemini 620pd Profiling, Product Manual

Search results

Summary of Contents for 620pd Profiling

Reviews:

Related manuals for 620pd Profiling

Brands by name

Popular brands