Rev. 00 09/22
UA05
Maintenance / Repairs
•
41
3.
Loosen the tensioning screw (
1
), so that the drive belt (
6
) is slack
4.
Remove the toothed belt.
5.
Insert the new toothed belt
6.
Pull on the motor with one hand to tension the toothed belt.
7.
Tighten the tensioning screw (
1
)
8.
Let the carriage slowly run backwards and forwards a few times, to
see if the drive belt does not ride up on the toothed wheel
Replacing the gliding elements
If the carriage starts to vibrate excessively during operation, especially at
the reversing points, in most cases the cause lies in too much play in the
gliding elements!
fig. 15: Material and tool required
Procedure:
1.
Switch off the electric power
2.
3.
Summary of Contents for UA05
