Gema UA05, Operating Instructions Manual, Page: 38 / 56

Rev. 00 09/22
38
•
Maintenance / Repairs UA05
Maintenance schedule
The following maintenance schedule is based on operation of 8
hours per day. Wear checks, maintenance and repair must be
adapted accordingly when operation conditions deviate.
The following components or modules are subject to a maintenance
schedule:
Component Activity Tool Interval
1 Check for unusual noises
–
1 x weekly
2
Linear guides and gliding
elements Check for deposited powder and
clean
Vacuum
Cleaner/Air
Gun
Soft cloth
1 x weekly
3
Linear guides and gliding
elements Check for wear and play and
replace if necessary
1 x monthly
4
Toothed belt of the linear
guide Check for deposited powder and
clean
Vacuum
Cleaner/Air
Gun
1 x monthly
5
Toothed belt of the linear
guide Check for wear and tension and
replace if necessary
1 x monthly
6 Toothed drive belt
Check for wear and tension and
replace if necessary
1 x monthly
7 Drive unit Visually check
–
1 x monthly
8 Support roller
Check for free movement and
wear (see chapter "Setting the
support roller")
–
1 x monthly
9
Cable and hose
connections Check if they are firmly fitted and
for wear
–
1 x monthly
10 Ground connection Check
–
1 x annually
11
All electrical screw and
clamp connections
Check if firmly fitted
–
1 x annually
The parts to be replaced during maintenance work are available
as spare parts.
►
Please refer to the spare parts list too!
Drive unit
DANGER
During assembly, cleaning, maintenance and commissioning when
close to live components, an electric shock can cause serious
injury or death.
► All work must be carried out only by trained personnel and when
no power is applied!