Gema UA05, Operating Instructions Manual, Page: 10 / 56

Rev. 00 09/22
10
•
Safety UA05
Special safety regulations
–
The axis may only be switched on and operated after careful reading
of this manual. Incorrect operation of the axis control unit can lead to
accidents, malfunctions or damage to the plant.
WARNING
The power of the axes is much stronger than that of a human
being!
► All axes must be protected from access during operation (see
local safety regulations).
► Never stand under the Z carriage when the vertical axis is not
operating!
–
The plugs and sockets of the axis control unit and the power unit of
the axis should only be unplugged when the power supply is
disconnected
–
The connecting cables between the control unit and the axis must be
laid in such a way, that they cannot be damaged during axes
operation. Please observe the local safety regulations!
–
The maximum upper stroke limit of the vertical axis must always be
set with reference to the maximum height of the booth gun slots. If
an incorrect (too high) stroke limit is set, this can lead to damage to
the reciprocator and/or the booth!
ATTENTION
During a test run, it must be guaranteed that the unit is not
damaged by the test!
► In particular, the limitations of the stroke range have to be
observed (for further information, see chapter "Setting the
mechanical stop")!
–
When repairing the axis, both the axis control unit and the axis must
be disconnected from the mains according to the local safety
regulations!
–
Repairs may be done only by authorized Gema service centers.
Unauthorized conversions and modifications can lead to injuries and
damage to the equipment. The Gema Switzerland GmbH guarantee
would no longer be valid.
–
Only original Gema spare parts should be used! The use of spare
parts from other manufacturers will invalidate the Gema guarantee
conditions!
–
We point out that the customer himself is responsible for the safe
operation of the equipment. Gema Switzerland GmbH is in no way
responsible for any resulting damage.
For further security information, see the more detailed Gema
safety regulations!