V
04/13
OptiFeed B FPS19
Troubleshooting
•
27
Troubleshooting
General information
Fault
Causes
Troubleshooting
The powder is not
fluidized
Compressed air not
present
Connect the equipment
to the compressed air
Fluidizing air adjustment
is set too low
Set the fluidizing air
correctly
Vibrator not functioning
Vibrator not plugged in
plug in
Vibrator switch in
position 0
switch on (position I)
Vibrator/condenser
broken
Contact local Gema
representative
Pump does not convey
or conveys insufficient
See therefore the
OptiFeed PP06 Powder
pump operating manual
Level control with level
sensor (option) not
running
Level control defective
Send in the level control
unit for repair
Level sensor defective
Send in the level sensor
for repair
Note:
For further information, see the OptiFeed PP06 Powder pump
operating manual!
