6 Technical data
6.1 Medium
Working medium:
Corrosive, inert, gaseous and liquid media which have no negative impact on the physical and
chemical properties of the body and diaphragm material.
The valve will seal in both flow directions up to full operating pressure (gauge pressure).
6.2 Temperature
Media temperature:
Valve body material
Media temperature
PVC-U, grey (code 1)
10 — 60 °C
ABS (code 4)
10 — 60 °C
PP, reinforced (code 5)
5 – 80 °C
PVDF (code 20)
-10 — 80 °C
Inliner PP-H grey / outliner PP, reinforced (code
71)
5–80 °C
Inliner PVDF / outliner PP, reinforced (code 75)
-10 — 80 °C
PP-H, natural (code N5)
5–80 °C
Ambient temperature:
Valve body material
Ambient temperature
PVC-U, grey (code 1)
10 — 50 °C
ABS (code 4)
-10 — 50 °C
PP, reinforced (code 5)
5 — 50 °C
PVDF (code 20)
0 — 50 °C
Inliner PP-H grey / outliner PP, reinforced (code
71)
5 — 50 °C
Inliner PVDF / outliner PP, reinforced (code 75)
-5 — 50 °C
PP-H, natural (code N5)
5 — 50 °C
If the emergency power module is used (control module code A1, A2), the maximum ambient tem-
perature is reduced to 40 °C.
6.3 Pressure
Operating pressure:
0 — 6 bar
All pressures are gauge pressures. Operating pressure values were determined with static operating pressure
applied on one side of a closed valve. Sealing at the valve seat and atmospheric sealing is ensured for the given
values.
Information on operating pressures applied on both sides and for high purity media on request.
The operating pressures apply at room temperature. In case of deviating temperatures, observe the pressure /
temperature correlation.
Pressure rating:
MG 10
PN 6
MG 20 - 40
PN 10
www.gemu-group.com
10 / 41
GEMÜ R629 eSyLite
6 Technical data
