ClosetAir Installation Manual
52
© 2017 Geist
GM1159 ClosetAir Installation Manual
facility electrical safety ground. The mating electrical interface to this equipment must
comply with International Electromechanical Commission (IEC) standards.
Electrostatic Discharge
Geist strongly recommends that an anti-static precautions be taken when installing,
removing, or working on and around static sensitivity equipment. Industry approved anti-
static devices such as wrist and heel straps, in conjunction with conductive foam pads,
should be available and implemented only after verifying that they are in good working
condition.
Electronic components such as memory modules, circuit boards, and LED displays, are
sensitivity to Electro-Static Discharge (ESD). Handling of such components should be done
only after proper anti-static workspace conditions have been established. Any static
producing packing materials such as plastic, Styrofoam, and some cardboards, should be
removed and discarded in a timely manner.
Explosive Environment
Do not operate this equipment in the presence of flammable gases or fumes. Operation of
any electrical equipment in such an environment constitutes a definite safety hazard.
Servicing and Adjustments
Do not attempt to service this equipment, there are no field serviceable parts or sub-
assemblies. Any adjustments should be made by authorized service personnel only.
Repairs and Modifications
Because of the danger of electrocution and/or severe health hazard, do not install substitute
parts or preform any unauthorized modifications of this equipment. It is best to contact Geist
for Warranty and Repair Service to ensure that safety features are maintained.
