Gehl SL3640E, Operator'S Manual, Page: 45 / 88

917334/BP0310 41
CHAPTER 5
SERVICE
Before servicing the machine, unless expressly
instructed to the contrary, exercise the MAN-
DATORY SAFETY SHUTDOWN PROCEDURE (page 6).
After service has been performed, be sure to restore all guards,
shields and covers to their original positions before resuming
loader operation.
This Service chapter details procedures for performing routine maintenance
checks, adjustments and replacements. Most procedures are referred to in the
Troubleshooting and Maintenance Schedule Schedule chapters of this manual.
Refer to the separate engine manual provided for engine-related adjustments,
lubrication and servicing procedures.
Note: All service procedures, except those described under the “Dealer Services”
topic are owner-operator responsibilities.
Important: More frequent service than the recommended intervals may be
required under severe operating conditions. You must decide if your operation
requires more service.
Important: Always dispose of waste lubricating oils and hydraulic fluids
according to local regulations or take to a recycling center for disposal. Do not
pour onto the ground or down the drain.
Dealer Services
The following areas of component service, replacement and adjustments require
special tools and knowledge for proper servicing and should be performed only
by your authorized Gehl skid-steer loader dealer: hydrostatic components,
hydraulic system gear pump, valves, cylinders, electrical components (other than
the battery, circuit breakers).
WARNING
Figure 23 Engine Compartment
1. Air Cleaner
2. Muffler
3. Radiator/Cooler
4. Coolant Recovery Tank
5. Hydraulic Oil Filter
6. Engine Oil Dipstick
7. Engine Oil Fill Cap
8. Engine Oil Filter
9. Fuel Filter
10. Fuel Pump
11. Water Trap
1 5
2
3
7
6
9
10
4
11
8