Gehl SL3640E, Operator'S Manual, Page: 39 / 88

917334/BP0310 35
Removing Attachments
1. Tilt the attachment bracket back until the attachment is off the ground.
2. Exercise the MANDATORY SAFETY SHUTDOWN PROCEDURE
(page 6).
3. Relieve any hydraulic pressure in the auxiliary and attachment lines.
a. Turn the key switch, but do not start the engine.
b. With the restraint bar down, move the auxiliary hydraulic control back and
forth. This will relieve the pressure in the hydraulic system.
4. With the engine OFF, leave the operator’s compartment, disconnect the auxil-
iary hydraulic hoses and rotate the latch levers completely vertical to fully
retract the latch pins.
5. Start the engine and be sure that the lift arm is fully lowered and in contact
with the loader frame.
6. Tilt forward and slowly back the loader until the attachment is free from the
loader.
Self-Leveling (optional)
The feature is designed to keep the attachment level while the lift arm is being
raised.
Using a Bucket
Always maintain a safe distance from electric
power lines and avoid contact with any electri-
cally charged conductor or gas line. Accidental contact or rupture
can result in electrocution or an explosion. Contact the “Digger’s
Hotline” or proper local authorities for utility line locations before
starting to dig.
Driving over Rough Terrain
When traveling over rough terrain, drive slowly with the bucket lowered.
Driving on an Incline
When traveling up or down on an incline, travel with the heavy end pointing
uphill. Try to avoid traveling on an incline, but always travel with the bucket as
possible to maintain stability.
WARNING