Gehl SL3640E, Operator'S Manual, Page: 43 / 88

917334/BP0310 39
Storing the Loader
If your skid-steer loader is to be stored for a long period of time, the following
procedure is suggested:
1. Fully inflate the tires.
2. Lubricate all grease zerks.
3. Check all fluid levels and replenish as necessary.
4. Add stabilizer to the fuel per the fuel supplier’s recommendations.
5. Remove the battery, charge fully and store in a cool, dry location.
6. Protect against extreme weather conditions such as moisture, sunlight and
temperature.
Transporting the Loader
Park the truck or trailer on a level surface. Be
sure the vehicle and its ramps have the weight
capacity to support the loader. Make sure the vehicle surface and its
ramps are clear of debris and slippery material that may reduce trac-
tion. Move the loader on and off the vehicle ramp slowly and care-
fully. Failure to follow these instructions could result in an overturn
accident.
Observe all local regulations governing
the loading and transporting of equip-
ment. Ensure that the hauling vehicle
meets all safety requirements before
loading the skid-steer loader.
1. Place blocks at the front and rear of
the hauling vehicle’s tires.
2. If the loader has an attachment, lift it
slightly off the ground.
3. Back the loader slowly and carefully
up the ramp onto the vehicle.
4. Lower the loader attachment to the
vehicle deck, turn off the engine and
remove the key.
5. Fasten the loader to the hauling vehi-
cle at the points indicated by the tie-
down decals.
6. Measure the clearance height of the
loader and hauling vehicle. Post the
clearance height in the cab of the vehi-
cle.
WARNING
Figure 21 Front Tie
Down/Retrieval point
Figure 22 Rear Tie Down/
Retrieval point