![background image](http://html1.mh-extra.com/html/gehl/powerbox-1639/powerbox-1639_operators-manual_2205869040.webp)
PROBLEM
POSSIBLE CAUSE
REMEDY
Insufficient hydraulic
Relief Valve pressure setting
Readjust Valve pressure setting.
Cylinder power
decreased.
Cylinder internal oil leakage
Replace seals.
Cylinder piston or seals defective.
Replace piston or seals.
Control Valve internal oil leakage.
Replace entire Valve housing.
Hydraulic Cylinder
Cylinder seals defective.
Replace seals.
external oil leakage
Cylinder rod damaged.
Replace rod.
Piston does NOT
Oil temperature is abnormally high.
Lower the oil temperature.
move smoothly.
Air being taken into system.
Replenish oil and retighten
suction connections.
Seals defective
Replace seals.
HYDRAULIC CYLINDERS
PROBLEM
POSSIBLE CAUSE
REMEDY
Starter will NOT turn.
Keyswitch is in OFF or RUN position.
Turn Keyswitch to START position.
Speed control not in OFF position.
Move speed control to OFF position.
Faulty wiring and/or terminations, or
Troubleshoot circuit and repair.
Fuse open.
Faulty Starter switch
Replace.
Battery NOT adequately charged.
Recharge.
Battery discharges and/
Terminal or cables are loose or
Clean terminals and cables and
or will NOT recharge.
corroded, Battery is defective, and/or
retighten or replace Battery; have
Alternator (or Regulator) defective.
dealer check Alternator
(or regulator).
Battery electrolyte level low.
Replenish with distilled water.
Alternator defective.
Replace or repair.
Operating Horn, etc.
Fuse blown.
Check cause ,correct and/or replace
does NOT function.
Fuse
Charge Indicator
Faulty Alternator
Replace.
does NOT activate
before Engine starts.
Battery is NOT sufficiently charged.
Recharge.
ELECTRICAL SYSTEM
907389/AP297
42
Printed In U.S.A.
Discount-Equipment.com