Description
Stock Number
6” (152.4mm) for left or right side
805464
12” (304.8mm)for left or right side
805466
18” (457.2mm)for left or right side
805468
Screed Propane Heat Kit:
When desired or where
operating conditions require, this kit (without tank) is
optional with either 1639 or 1649 models. Order by
stock number 805462.
To operate the Propane Heater:
1.
Check equipment carefully each time before
lighting.
2.
Do NOT operate in enclosed areas or near flam-
mable materials.
3.
Close the Tank Valve and the valves on both
Handles.
4.
Slowly open Tank Valve.
5.
Adjust Regulator 15-20 psi.
6.
Remove one burner from the Burner Tube
Support and light with a Striker. Place Burner
back into Burner Support Tube.
7.
Light the second Burner in the same way.
8.
Re-adjust the Regulator to 15-20 psi.
9.
Do NOT leave Power Box Paver unattended
with burners on. If the flame is extinguished
quickly close valves. Wait 5 minutes before you
re-light burner to allow fumes to dissipate.
10.
When Burners are not in use, close Valve on
Tank, crack and close Valves on Handles to
release gas pressure in Hoses.
Printed In U.S.A.
23
907389/AP297
Discount-Equipment.com
