page | 57
Advanced Operation
Commands
UDP Configuration
Command
Description
#set_udp_port
Sets the local UDP listening port
#set_udp_remote_ip
Sets the remote UDP IP address
#set_udp_remote_port
Sets the remote UDP listening port
#show_udp_port
Displays the current local UDP listening port
#show_udp_remote_ip
Displays the current remote UDP IP address
#show_udp_remote_port
Displays the current remote UDP listening port
#use_udp_enable
Enables / disables UDP access
#set_udp_port
The
#set_udp_port
command sets the local UDP server listening port. The default port
setting is
21
. The matrix must be rebooted after executing this command. Use the
#show_udp_port command to display the current local UDP listening port.
Syntax
:
#set_udp_port param1
Parameters
:
param1
Port
[1
...
65535]
Example
:
#set_udp_port 56
UDP COMMUNICATION PORT 56 IS SET
