page | 30
Operating the 32x32 Modular Matrix for HDMI w/ HDCP
Routing Basics
Routing a Source to All Outputs
The following example illustrates the process for routing a single input to all outputs,
simultaneously.
1. Press the
All
button on the front panel.
2. The display on the front panel will show the following:
3. Select an input (1 - 32) using the numerical keys on the front panel. For this example,
we will route Input 20 to all outputs. Therefore, we’ll press buttons 2 and 0.
If an incorrect value is entered by accident, use the ← button to delete the last
number entered.
Switch all out
TO :
Switch all out
TO : 20
switch all out
to :
All
