page | 55
Commands
Advanced Operation
#sipadd
The
#sipadd
command sets the IP address of the matrix. The IP address must be
entered using dot-decimal notation. The matrix must be rebooted after executing this
command. The default IP address is
192.168.1.72
. Use the
#show_ip
or
#ipconfig
command to display the current IP address of the matrix.
Syntax
:
#sipadd param1
Parameters
:
param1
IP address
Example
:
#sipadd 192.168.1.239
IP ADDRESS 192.168.1.239 IS SET. PLEASE REBOOT THE UNIT.
#snetmask
The
#snetmask
command sets the subnet mask. The net mask must be entered using
dot-decimal notation. The matrix must be rebooted after executing this command.
The default net mask is
255.255.255.0
. Use the
#show_netmask
command to display
the current net mask of the matrix.
Syntax
:
#snetmask param1
Parameters
:
param1
Net mask
Example
:
#snetmask 255.255.0.0
NETMASK ADDRESS 255.255.0.0 IS SET. PLEASE REBOOT THE UNIT.
