Gefen GEF-HDFST-MOD-32432-HD User Manual Download Page 4

Page: 4 / 142

32x32 Modular Matrix for HDMI w/ HDCP

Gefen, LLC

c/o Customer Service

20600 Nordhoff St.

Chatsworth, CA 91311

Telephone:

(818) 772-9100

(800) 545-6900

Fax:

(818) 772-9120

Email:

[email protected]

Visit us on the Web:

www.gefenpro.com

Technical Support Hours:

8:00 AM to 5:00 PM Monday - Friday, Pacific Time

For 24 / 7 support, see the back of the product for the

support

number

32x32 Modular Matrix for HDMI w/ HDCP

is a trademark of Gefen, LLC.

Important Notice

Gefen, LLC reserves the right to make changes in the hardware, packaging, and any

accompanying documentation without prior written notice.

All trademarks are the property of their respective owners.

Contacting Gefen Technical Support

Summary of Contents for GEF-HDFST-MOD-32432-HD















































































































































Search results

Summary of Contents for GEF-HDFST-MOD-32432-HD

Reviews:

Brands by name

Popular brands

Gefen GEF-HDFST-MOD-32432-HD, User Manual

Search results

Summary of Contents for GEF-HDFST-MOD-32432-HD

Reviews:

Brands by name

Popular brands